Compression Recovery Devices for Clinical Rehabilitation
Multi-chamber pneumatic compression systems designed for hospitals, rehabilitation centers, physiotherapy clinics and medical distributors, with configurable pressure ranges, treatment modes and garment options for professional recovery applications.
Clinical Applications to Review by Model & Market
For medical rehabilitation channels, intended use, treatment protocols and regulatory documentation should be confirmed for the exact product model and destination market.
Lymphedema & Venous Edema
For lymphedema or edema-related applications, confirm that the selected model's intended use, pressure range, garment configuration and regulatory documentation support the required clinical use.
DVT Prevention & Prophylaxis
For DVT-prophylaxis applications, use only products whose intended use and applicable regulatory clearance support the required clinical protocol.
Post-Surgical & Orthopedic Rehab
For post-surgical and orthopedic rehabilitation programs, product selection and settings should follow clinician protocols and the selected model's approved intended use.
Neurological Care & Nursing Homes
For nursing and neurological-care environments, confirm patient suitability, garment fit, contraindications and the selected model's intended use before deployment.
Chronic Venous Insufficiency (CVI)
For chronic venous-insufficiency programs, select products according to the clinician's protocol and the model-specific regulatory documentation.
Sports Medicine & Physiotherapy
For sports-medicine and physiotherapy settings, pneumatic compression can be incorporated into professional recovery routines according to practitioner protocols and product labeling.
Designed for Professional Quality & Compliance Review
LEAMAI pneumatic compression products are manufactured under an ISO 13485 quality-management system. Clinical buyers should confirm the exact model, intended use, pressure specification, garments and applicable regulatory documents before ordering.
- ✓ Multi-Chamber Garment Options: 4 / 6 / 8 / 12-chamber configurations are available for supported OEM projects.
- ✓ Controller Functions: Modes, spot massage and chamber-control functions vary by standard model and OEM project.
- ✓ Garment Materials: TPU composite fabric, nylon and Oxford options with breathable mesh, fleece or antibacterial lining choices.
- ✓ Noise Testing: Noise level is tested; confirm model-specific noise data in the quotation where required.
Clinical System Specification Matrix OEM / ODM Configurable
| Parameter | Factory Capability | OEM Customization Options |
|---|---|---|
| Chamber Layout | 4 / 6 / 8 / 12 Chambers | By Garment / OEM Project |
| Pressure Range | 30 – 270 mmHg OEM Capability | By Controller / OEM Project |
| Compression Modes | 1–12 Modes (OEM Range) | Model / Project-Specific Modes |
| Cycle / Hold Time | 10 – 90 min Timer Options | UI / Mode Settings by Project |
| Garment Options | Leg, Arm, Waist, Hip, Vest | S–XL / Approx. 155–200 cm User Height |
| Power & Portability | Corded or 2200–3000mAh Battery Options | AC/DC or Portable Configurations |
Medical Rehabilitation Product Lineup
LM-C Rechargeable Touchscreen System
Medical-grade rechargeable touchscreen controller engineered for professional clinical rehabilitation and pneumatic therapy regimens.
- • 5 standard sequential operating modes
- • 30–250 mmHg precision pressure range
- • 10–60 min timer / 3000mAh lithium battery
- • Plug-in + cordless use / HD touch display
LM-B Portable Multi-Mode System
Portable multi-mode compression controller providing versatile gradient pressures for dynamic therapy and post-acute physical care.
- • 12 targeted clinical recovery modes
- • 60–270 mmHg dynamic output / 3200mAh
- • 10–60 min intelligent session timer
- • Cordless mobility / Smart LED digital interface
Compression Recovery Boots & Sleeves
Ergonomic multi-chamber pneumatic garments with TPU-laminated composite fabrics for seamless sequential pressure transfer.
- • Full Leg Boots (4, 6, 8, 12 Chambers)
- • Arm sleeves for targeted upper-limb lymphedema
- • Waist, abdominal & hip coverage attachments
- • High-frequency airtight heat-sealed construction
30,000 m² Facility with Stringent Medical Testing Standards
Quality control follows IQC → IPQC → FQC → OQC, including pressure accuracy inspection, 100% air-chamber sealing checks, electrical safety testing and applicable durability tests.
Comprehensive OEM / ODM Capabilities for Medical Brands
Whether you are expanding your medical catalog, developing a private-label rehabilitation brand, or sourcing clinical pneumatic units for public tenders, LEAMAI provides end-to-end manufacturing and regulatory support.
Custom Software & UI
Multilingual interfaces, custom screen branding, personalized pressure sequence modes and timers.
Industrial Design & Mold
Controller-housing color, supported appearance customization and logos via laser, silk screen, hot stamping or embossing.
Medical Packaging & Bags
EVA hard-shell cases, backpacks / nylon bags, custom retail packaging and multilingual user manuals.
Regulatory File Support
Support with applicable CE / EU MDR, FDA (510(k)), RoHS, FCC, EMC or LVD documentation plus export documents according to model and destination market.
Request Medical Rehabilitation Quotation
We empower hospitals, rehabilitation centers, physiotherapy clinics, and global medical distributors with reliable pneumatic compression systems with model-specific compliance documentation.